Carbon Cloth
Serial Number
W1S1011
Starting From
TWD
(Approx:USD )
※ Charged in TWD at checkout.
※ Charged in TWD at checkout.
with size
Quantity
- Description
- Specification
W1S1011 a carbon cloth with a Microporous Layer (MPL) and 0.41mm in thickness. Carbon Cloth Gas Diffusion Layers (GDLs) are designed to meet the various requirements in Hydrogen (PEMFC) and Direct Methanol Fuel Cells (DMFC). These Gas Diffusion Layers are manufactured by proprietary woven technology and consistently perform well in fuel cell efficiency tests. Our second-generation carbon support has been meticulously developed to offer even better performance and characteristics.
Advantages of CT Carbon Cloth:
A gas diffused pathway from flow channels to the catalyst layer.
Help removing by-produced water outside of the catalyst layer and prevent flooding.
Keep some water on surface for conductivity through the membrane.
Heat transfer during cell operation.
Provide enough mechanical strength to hold MEA from extension caused by water absorbance.
Carbon Cloth Applications:
PEMFC fuel cell gas diffusion layer
DMFC fuel cell gas diffusion layer
MFC microbial fuel cell gas diffusion layer
Friction element / friction material substrate (ex. Automotive clutch facing, drag washer)
Carbon-carbon composite substrate
Carbon Cloth Electrochemical Performance
| Test Equipment | FCED® PD50 / Asia Pacific Fuel Cell Technologies, Ltd. | ||
|---|---|---|---|
| Reaction Area | 25 cm2 | Fuel Supply Method | Constant Flow |
| Type of Anode Fuel | H2 | Type of Cathode Fuel | Air |
| Anode Gas Flow | 1.5 slpm | Cathode Gas Flow | 2.5 slpm |
| Anode Humidification Temperature | 65°C | Cathode Humidification Temperature | 65°C |
| Relative Humidity | 90% | Torque | 25 kgf cm |
| Battery Temperature | 60°C | Back Pressure | Non |
| Bipolar Plate | gate-type | Gasket (@50Kpa) | 260 microns |
| CCM | Catalyst loading: An / Ca 0.1 / 0.3 mg / cm2 | ||
| GDL | W1S1011 | ||
Carbon Cloth without MPL & PTFE
| Measurement | Units | Method | W1S1011 |
|---|---|---|---|
| Thickness | mm | TECLOCK SM-114 | 0.41 |
| Basic Weight | g/m2 | ASIMID-646 | 200 |
| Air Permeability | sec | Gurley | <55 |
| Through-Plane Resistance | mΩcm2 | ASTM C-611 | <13 |
| Tensile Strength (MD) | N/cm | ASTM D-828 | 10 |
| Tensile Strength (XD) | N/cm | 5 |
*All data are the average values that do not represent specifications and tolerance.
Related Products
W0S1011
W0S1011is a woven carbon cloth without a Microporous Layer (MPL) and with 0.36mm in thickness.
TWD 2,400
(Approx:USD - )
GDS090S
GDS090S is a carbon paper without a Microporous Layer (MPL) and with thickness of 0.09 mm. It is with High Heat Treatment but a low-cost alternative to conventional carbon paper Gas Diffusion Layer (GDL) materials.
TWD 2,150
(Approx:USD - )
GDS180SHT
GDS180SHT is a carbon paper without a Microporous Layer (MPL) and with thickness of 0.18 mm. It is with High Heat Treatment but a low-cost alternative to conventional carbon paper Gas Diffusion Layer (GDL) materials.
TWD 2,150
(Approx:USD - )
GDS180S
GDS180S is a carbon paper substrate without a Microporous Layer (MPL). It has a total thickness of 0.18mm and with low-cost alternative to conventional carbon paper Gas Diffusion Layer (GDL) materials.
TWD 2,000
(Approx:USD - )
GDS210
GDS210 is a carbon paper substrate without a Microporous Layer (MPL). It has a total thickness of 0.21mm and with low-cost alternative to conventional carbon paper Gas Diffusion Layer (GDL) materials.
TWD 2,000
(Approx:USD - )
GDS230
GDS230 is a carbon paper substrate without a Microporous Layer (MPL). It has a total thickness of 0.23mm and with low-cost alternative to conventional carbon paper Gas Diffusion Layer (GDL) materials.
TWD 2,000
(Approx:USD - )
GDS250
GDS250 is a carbon paper substrate without a Microporous Layer (MPL). It has a total thickness of 0.25mm and with low-cost alternative to conventional carbon paper Gas Diffusion Layer (GDL) materials.
TWD 2,000
(Approx:USD - )
GDS310
GDS310 is a carbon paper substrate without a Microporous Layer (MPL). It has a total thickness of 0.31mm and with low-cost alternative to conventional carbon paper Gas Diffusion Layer (GDL) materials.
TWD 2,000
(Approx:USD - )
GDL120S
GDL120S is a carbon paper with a Microporous Layer (MPL) of total thickness by 0.12mm . It is with High Heat Treatment and it is a low-cost alternative to conventional carbon paper Gas Diffusion Layer (GDL) materials.
TWD 3,200
(Approx:USD - )